RAD Data comm ASMI-450 Manual de usuario Pagina 73

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 160
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 72
User's Manual Chapter 3 Configuration Management
LRS-24 RADview/TDM Setting Operational Parameters 3-51
Parameters Possible Values / Remarks
Type The modem type.
ASMi-52, ASMi-52CD, ASMi-52/CD4w, ASMi-52CQ
Read-only
SHDSL Mode The SHDSL Mode, relevant for
ASMi-52, ASMi-52CD, ASMi-52CD/4w, ASMi-52CQ card
STU-C or STU-R
Read-only
Transmission Mode The Transmission mode.
Annex A, Annex B
Read-only (RW for Central Unit only)
EOC Compatible Proprietary, Standard
Read-only
Power Backoff Enable, Disable
Line Probe Enable Checked=Enabled
Unchecked=Disabled
Read-only for AMSi-52/CD4W device, STU-R device, DXC card.
Current SNR Margin (dB) Disabled if Line Probe is unchecked
This field contains a check box and Slider.
Unchecked=disabled slider
Checked=enabled slider
Slider values:
-10… +10
Worse Case SNR Margin
(dB)
Disabled if Line Probe is unchecked.
Unchecked=disabled slider
Checked=enabled slider
Slider values:
-10… +10
Power Spectral Density
(PSD) Mask
Symmetric, AsymmetricRead-write only for NE STU-C and when Line Probe is
disabled
When there is no communication with the far-end device, the actual PSD mask
value is the same as configued in the SHDSL Line Configuration dialog box.
Loop Attenuation
Threshold (dB)
Unchecked=0
Checked=enabled Slider
Slider values:
1...127
SNR Margin Threshold
(dB)
Unchecked=0
Checked=enabled Slider
Slider values:
1...15
Vista de pagina 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 159 160

Comentarios a estos manuales

Sin comentarios