
Installation and Operation Manual Chapter 7 Application Tutorial
Egate-100 Ver. 4.0 IP DSLAM and WiMAX Backhauling over SDH/SONET 7-35
The bridge ports are configured in the Bridge Port menu
(Main Menu>Configuration>Applications>Bridge>Bridge Ports).
Table
7-8. Bridge Port Specifications
Bridge port
number
Bind to Egress tag
handling
1 Host (automatic) Stripping
2 GbE-1 None
3
GbE-2 None
4
FE MNG None
111
Logical port 45 None
112
Logical port 46 None
113
Logical port 47 None
³ To configure the bridge port for the host:
• From the Bridge Port menu, configure the Egress Tag Handling for the host
bridge port to perform stripping, as illustrated in
Figure
7-21
.
³ To configure the bridge port for the Gigabit Ethernet ports:
1. From the Bridge Port menu, configure the bridge port parameters for bridge
port 2, binding it to GbE-1, as illustrated in
Figure
7-22
.
2. Repeat the same configuration for bridge port 3, binding it to GbE-2.
³ To configure the bridge port for the Fast Ethernet port:
• From the Bridge Port menu, configure the bridge port parameters for bridge
port 4, binding it to ETH MNG, as illustrated in
Figure
7-48
.
Comentarios a estos manuales