RAD Data comm 100 Especificaciones Pagina 156

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 318
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 155
Chapter 4 Configuration Installation and Operation Manual
4-64 Configuring Egate-100 for Operation Egate-100 Ver. 4.0
Egate-100
Main Menu> Configuration> Applications> Bridge
1. VLAN Mode > (Aware)
2. Aging Time (Sec)[30 - 10000] ... (300)
3. Split Horizon > (Disabled)
4. Vlan Ethertype (HEX) ... (8100)
5. Loop Detection ... (Enable)
6. Vlan Loop Detection [1 - 4094] ... (1)
7. Static MAC Table [] >
8. Remote Terminal (Enable)
9. Bridge Port for Remote Terminal (100)
10. Bridge Ports >
11. VLAN Membership >
Please select item <1 to 10>
ESC-prev.menu; !-main menu; &-exit
Figure
4-63. Bridge Menu
Table
4-29 Bridge Parameters
Parameter Description Possible Values
VLAN Mode
Specifies the VLAN mode:
Aware. Forwarding is based on VLAN and
MAC address. The bride operates
according to 802.1Q. If enabled, VLAN
Membership becomes available.
Unaware. Forwarding is based on the MAC
address only. The bridge operates
according to 802.1D
Default: Unaware
Unaware
Aware
Aging Time For dynamic table entries. If the aging time
elapses and no frame has been received with
this MAC, the entry is erased from the table.
Default: 300
30–10000 seconds
Vista de pagina 155
1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 317 318

Comentarios a estos manuales

Sin comentarios