RAD Data comm 100 Especificaciones descargar pdf (Pagina 124)

Chapter 4 Configuration Installation and Operation Manual

4-32 Configuring Egate-100 for Operation Egate-100 Ver. 4.0

Configuring the Frame Buffers

Buffers are used to hold frames in the event of a burst of traffic. Egate-100’s

management software allows you to customize Egress drop thresholds (maximum

burst supported) for individual logical port queues – each of four priority levels –

and for the total of all logical-port queues of each priority level. Drop thresholds

can also be specified for the Gigabit Ethernet and Host ports. See

Chapter 1

for

additional information.

³ To configure buffer management:

1. Navigate to Main Menu > Configuration > System > Buffer Management

The Buffer Management menu appears (see

Figure

4-33

2. From the Buffer Management menu, select a logical port priority level (for

example, Traffic Class 1 Max) and specify the maximum number of buffers

allowed for each logical port queue at this Quality of Service priority level.

3. Repeat the previous step for any additional priority levels you wish to

customize at the individual queue level (Max).

4. From the Buffer Management menu, select a logical port priority level (for

example, Traffic Class 1 Total) and specify the total maximum number of

buffers for all logical port queues at this Quality of Service priority level.

5. Repeat the previous step for any additional priority levels you wish to

customize at the queue group level (Total).

6. Select GbE Max to change the maximum number of buffers for the Gigabit

Ethernet ports.

7. Select HOST Max to change the maximum number of buffers for host

management.

³ To reset buffer management parameters:

1. Navigate to Main Menu > Configuration > System > Buffer Management

The Buffer Management menu appears as illustrated in

Figure

4-33

2. From the Buffer Management menu, select Set to Default.

The default configuration is restored.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 317 318

Sin comentarios

RAD Data comm 100 Especificaciones Pagina 124