RAD Data comm 100 Especificaciones descargar pdf (Pagina 112)

Chapter 4 Configuration Installation and Operation Manual

4-20 Configuring Egate-100 for Management Egate-100 Ver. 4.0

Controlling Management Access

You can configure the management access from the management access menu.

You can configure access for Telnet, SNMP and Web access as explained below.

³ To access the Management Access menu:

• Navigate to Main Menu > Configuration > System > Management, and then

select Management Access.

The Management Access menu appears as illustrated in

Figure

4-18

Egate-100

Configuration> System> Management> Management Access

1. Telnet > (Enable)

2. SNMP > (Enable)

3. WEB > (Enable)

Please select item <1 to 3>

ESC-prev.menu; !-main menu; &-exit

Figure

4-18. Management Access Menu

³ To configure Telnet access:

• Select Telnet and then choose as follows:

 Enable – All users are enabled.

 Enable Managers Only – Network managers listed in the manager list are

enabled.

 Secure – Users using an SSH connection are enabled.

 Secure Managers Only – Network managers listed in the manager list and

using an SSH connection are enabled.

 Disable – Telnet access is disabled.

³ To configure SNMP access:

• Select SNMP and then choose as follows:

 Enable – All users are enabled.

 Enable Managers Only – Network managers listed in the manager list are

enabled.

 Disable – SNMP access is disabled.

³ To configure Web access:

• Select WEB and then choose as follows:

 Enable – All users are enabled.

 Enable Managers Only – Network managers listed in the manager list are

enabled.

 Secure – Users using an SSL connection are enabled.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 317 318

Sin comentarios

RAD Data comm 100 Especificaciones Pagina 112