RAD Data comm 100 Especificaciones descargar pdf (Pagina 141)

Installation and Operation Manual Chapter 4 Configuration

Egate-100 Ver. 4.0 Configuring Egate-100 for Operation 4-49

Parameter Description Possible Values

Alarms Low VC level, per VC12 or VT1.5

link. Range of links can be set.

For VC12: 1-63; For VT1.5: 1-84

For each port, or range of ports,

select the port number and specify

whether to mask or unmask alarms

Default: Unmasked

Masked

Unmasked

³ To configure LVC event threshold:

1. Navigate to Main Menu > Configuration > Physical Layer >SDH/SONET > LVC

and select Event Threshold.

The LVC Event Threshold menu appears as illustrated in

Figure

4-46.

Egate-100

Main Menu> Configuration> Physical Layer> SDH/SONET> >LVC

>Event Threshold (LVC Number 1)

Counter Rising Falling

Trib ES (0) (0)

Trib SES (0) (0)

Trib CV (0) (0)

Trib UAS (0) (0)

FE-Trib ES (0) (0)

FE-Trib SES (0) (0)

FE-Trib CV (0) (0)

FE-Trib UAS (0) (0)

1. Change Cell [0-65535]

Please select item <1 to 1>

F - Forward; B - Backward

ESC-prev.menu; !-main menu; &-exit

Figure

4-46. LVC Event Threshold Menu

2. Configure event threshold parameters according to

Table

4-23.

Table

4-23. LVC Event Threshold Parameters

Parameter Description Possible Values

Counter Displays the event

threshold counter

Trib ES – Trib ES threshold value for sending

event log and trap.

Trib SES – Number of tributary severely errored

seconds (SES) in the current interval. A second

is considered to be a severely errored second if

multiple error events of the types described for

ES occurred.

Trib CV - Number of tributary coding violations

(CV) in the current interval: a coding violation is

declared when a Bit Interleaved Parity (BIP)

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 317 318

Comentarios a estos manuales

Sin comentarios

RAD Data comm 100 Especificaciones Pagina 141

Comentarios a estos manuales

Relacionado con productos y manuales para Redes RAD Data comm 100