RAD Data comm 100 Especificaciones descargar pdf (Pagina 166)

Chapter 4 Configuration Installation and Operation Manual

4-74 Configuring Egate-100 for Operation Egate-100 Ver. 4.0

Configuring QoS Priority Mapping

Egate-100 supports four different traffic queues. These traffic queues can be

assigned different priority levels, according to the level of service represented by

each queue, where Traffic Class 0 represents the highest priority and Traffic

Class 3 the lowest.

³ To assign priorities to traffic queues for 802.1p and IP Precedence:

1. Following the above procedure, select 802.1p or IP Precedence as the desired

traffic classification method.

2. Navigate to Main Menu > Configuration > Applications > QoS > Queue

Mapping Profile > Priority Mapping.

The Priority Mapping menu appears as illustrated in

Figure

4-75

3. From the Priority Mapping menu, select the desired priority level (Tag Value).

Eight priority levels are available, ranging from 0 to 7.

4. Enter the assigned traffic queue number (Traffic Class 0 – 3).

5. To assign a traffic queue to additional priorities, repeat this procedure for

each desired priority.

6. Select Save to save the changes.

³ To assign priorities to traffic queues for DSCP:

1. Following the above procedure, select DSCP as the desired traffic

classification method.

2. Navigate to Main Menu > Configuration > Applications > QoS > Queue

Mapping Profile > Priority Mapping.

The Priority Mapping menu appears as illustrated in

Figure

4-76

. The

menu lists only those values that differ from Traffic Class 0.

3. From the Priority Mapping menu, select the desired Tag Value (0 – 63) and

enter the assigned traffic queue number (Traffic Class 0 – 3).

4. To add a new entry, type A and enter the Tag Value and Traffic Class as

illustrated in

Figure

4-77

and

Figure

4-78.

5. To assign a traffic queue to an additional value, repeat this procedure for

each desired Tag value.

Unassigned values are automatically mapped to the highest priority queue

(Traffic Class 0).

6. Select Save.

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 317 318

Comentarios a estos manuales

Sin comentarios

RAD Data comm 100 Especificaciones Pagina 166

Comentarios a estos manuales

Relacionado con productos y manuales para Redes RAD Data comm 100