RAD Data comm FOMi-T1 Manual de usuario Pagina 9

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 18
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 8
132
RAD Data Communications 2011 Catalog
ASMi-31
Sync/Async 2-Wire Manageable IDSL Modem
2-wire sync/async, all-rate short range
modem
Full inband management of local and
remote modems
Operating range up to 8 km (5 miles)
over 24 AWG cable, independent of data
rate
Selectable data rates: 1.2 kbps to
128 kbps
Supports digital interfaces:
V.24/RS-232, V.35, X.21, RS-530,
V.36/RS-449, Ethernet (bridge) or G.703
codirectional
Optional built-in router
Works opposite Megaplex and DXC IDSL
cards
The ASMi-31 manageable IDSL modem operates
full duplex over twisted pair, 2-wire unconditioned
lines. It has a transmission range of up to 8 km
(5 miles) over 24 AWG cable and operates at
user-selectable rates from 1.2 kbps to 128 kbps.
The ASMi-31 can also work opposite the DXC
with D8U card, or opposite the Megaplex with
the U interface module.
SNMP management is available for the cards
inside the rack via the management channel
and for the customer premises standalone units.
The RADview SNMP application running on an
HP OpenView UNIX or PC platform supports
management of the ASMi-31 and other RAD
modems.
The ASMi-31 is an IDSL modem based on 2B1Q
technology, which is common to both ISDN and
DSL technologies. This line code enables
efficient transmission over poor quality lines.
Transmit timing is provided internally or
recovered externally from the received signal. It
can also be derived externally from the digital
interface, enabling tail-end applications.
RADview
SNMP
management
station
DXC-30
Megaplex-2100
2-wire
Up to8km
(5 miles)
ASMi-31
Router
ASMi-31
Router
1
4
1
4
For latest updates visit www.rad.com
ASM-61
2-Wire Symmetrical VDSL-Based Modem
A complete solution for high speed services over
existing copper lines, the ASM-61 provides full
duplex, symmetrical 10 Mbps Ethernet traffic
over 2-wire 24 AWG (0.5 mm) copper cable, for
distances of up to 1 km (0.6 miles).
The ASM-61 extends the range of internal LANs
using VDSL technology, based on ETSI QAM line
coding requirements for the physical medium.
The ASM-61 compensates for line impairments
and mixed cabling by using advanced
equalization, adaptive filtering and echo
cancellation technology.
An internal clock is available. In this mode, the
internal clock generator provides the clock for
the digital interface and the line.
The ASM-61 is powered by AC voltage. It is
available as a standalone unit that can be
mounted in a standard 19-inch rack using
special hardware.
LAN LAN
2-wire 10 Mbps
ASM-61 ASM-61
1km (0.6 miles)
Data rate of 10 Mbps
Range of up to 1 km (0.6 miles) over
24 AWG cable
User interface is a built-in 10/100BaseT
Ethernet bridge
Plug-and-play operation
For latest updates visit www.rad.com
DSL MODEMS
Vista de pagina 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Comentarios a estos manuales

Sin comentarios