RAD Data comm 146 Manual de usuario descargar pdf (Pagina 145)

5620 Model Descriptor for LA-110 User’s Manual Chapter 5 Cross Connection

Configuring Cross Connections 5-9

Table 5-5. LAN VC Connections Info Parameters (Cont.)

Parameter Valid Ranges/Remarks

Traffic Descriptor

1…200

Read-only

Continuity Check The VCC admin status.

Off Two Way (down), On Two Way (up), On-source, On-sink

Read-only

Last Change This field indicates the time of the last change on the port.

Read-only

The following fields are available only for Bridge VLAN Aware.

Connected To

Bridge Port #, Not Connected

Priorities

0…7

VCL Connection



To edit a LAN VCL cross connection:

1. In the Navigator, select the LAN Connection, right-click and select

Configure > Edit LAN VCL Connection.

The Edit LAN VCL Connection form opens in which you can connect the

bridge port to the VCL and assign VLAN Priority to the connection. (This is

only applicable to VLAN Aware mode.)

An ATM Bridge Port can be connected to up to three

VCLs according to

the following conditions:

 Each connection includes a VLAN Priority, which can be one or more

values from a specified VLAN Priority Range (0…7).

 Two connections of the same ATM Bridge Port CANNOT share the

same VLAN Priority.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 201 202

Sin comentarios

RAD Data comm 146 Manual de usuario Pagina 145