RAD Data comm 10/100BaseT to STM-1/OC-3 Converter RIC-155 Especificaciones descargar pdf (Pagina 59)

RIC-155 Installation and Operation Manual Chapter 4 Configuration

Additional Tasks 4-23

The Software Version screen appears (see Figure 4-24).

RIC-155

SW files

Software active version: 1.00

Software active partition: 0

Code size: 190

Date: 28-02-03

Software backup version: 0.00n00

Software backup partition: 1

Code size: 0

Date: 0-0-0

Boot version: 2.20

Boot mng version: 4.00

SW Files Table

ESC-prev.menu; !-main menu; &-exit

Figure 4-24. Software Version Screen

Switching Software Versions

If the active software becomes corrupted, you can switch it with the backup file.



To switch software versions:

1. From the File System menu, select Swap SW Files.

RIC-155 displays the following message:

Request to swap SW files!!! Are you sure? Y/N

2. Type Y to confirm the file swap.

RIC-155 performs the swap and sends the following string:

Program Switching

The active software becomes backup and vice versa. At this stage, RIC-155

is automatically reset.

If you try to switch the software versions when only one version is available,

RIC-155 responds with the following message:

Impossible to switch – no other program

Press any key to continue

Resetting RIC-155

RIC-155 supports two types of reset:

• Reset to the default setting

 Resetting all parameters

 Resetting all parameters, except for master clock and management options

• Overall reset of the device.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 89 90

Sin comentarios

RAD Data comm 10/100BaseT to STM-1/OC-3 Converter RIC-155 Especificaciones Pagina 59