RAD Data comm 10/100BaseT to STM-1/OC-3 Converter RIC-155 Especificaciones descargar pdf (Pagina 37)

Configuring RIC-155 for Management 4-1

Chapter 4

Configuration

4.1 Configuring RIC-155 for Management

Configuration of RIC-155 is performed via menu-driven embedded software, using

a standard ASCII terminal or PC running a terminal emulation application,

connected to the rear panel CONTROL port. Alternatively, you can manage

RIC-155 over Telnet, a PC running a Web browsing application such as

ConfiguRAD or the RADview-Lite application via the MNG port.This section

describes the configuration procedures for the RIC-155 converter.



To access the Configuration menu:

• From the Main menu, select Configuration.

The Configuration menu appears (see Figure 4-1).

RIC-155

Configuration

1. Quick Setup >

2. System Configuration >

3. Physical Ports Configuration >

4. Bridge Configuration >

Please select item <1 to 4>

ESC-prev.menu; !-main menu; &-exit

Figure 4-1. Configuration Menu

The Quick Setup menu is described in the Quick Start Guide.

Define the RIC-155 internal SNMP agent parameters in order to enable SNMP,

Telnet or Web-based management (see Figure 4-2). Also you can enter additional

information about your RIC-155, such as contact person, unit location etc.



To access the Management menu:

• Follow the path: Configuration > System Configuration >Management.

The Management menu appears (see Figure 4-2).

Note

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 89 90

Sin comentarios

RAD Data comm 10/100BaseT to STM-1/OC-3 Converter RIC-155 Especificaciones Pagina 37