RAD Data comm LA-210 Manual de usuario Pagina 92

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 158
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 91
Chapter 4 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
4-18 Configuring LA-210 RV-EMS/NGN LA-210 Ver. 1.5
³ To define a bandwidth profile for VLAN 555:
1. Follow the instructions above.
2. Under Name, enter the desired bandwidth profile name, for example
BW_for_service_555
3. Set CIR to 2000 Kbps and EBS to 12176 Bytes (
Figure
4-20
).
Figure
4-20. Adding Ingress BW Profile 555
4. Click <Set> to save your settings and then <Cancel> to close the Ingress BW
dialog.
³ To define a service for VLAN 777 and CoS 3 (p.bit 4)
1. In the LA-210 View window, select the System view.
2. On the menu bar, click Configuration > Flows.
The Flow dialog appears (
Figure
4-17
).
3. Under User ETH1, select Flow 1, and then click <Add>.
4. Select Add Service.
The Add CoS window appears (
Figure
4-21
).
Vista de pagina 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 157 158

Comentarios a estos manuales

Sin comentarios