RAD Data comm LA-210 Manual de usuario Pagina 108

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 158
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 107
Chapter 4 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
4-34 Testing the Flow Based Configuration RV-EMS/NGN LA-210 Ver. 1.5
Defining the Same Priority to All Frames
Follow the instructions under Configuring LA-210 for Advanced Configuration
to map both p.bit 7 and p.bit 4 to CoS 6.
This means that frames with p.bit 4 and 7 are mapped to CoS 6 and therefore to
the same queue.
³ To define CIR and EIR settings:
1. Configure Service777_pbit_4 to CIR = 10000 Kbps and EIR = 2000 Kbps.
2. Configure Service555_pbit_7 to CIR = 1000 Kbps and EIR = 2000 Kbps.
Figure
4-35. Bandwidth Profile for Service777 - CIR = 10 Mbps, EIR = 2 Mbps
Vista de pagina 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 157 158

Comentarios a estos manuales

Sin comentarios