RAD Data comm LA-210 Especificaciones Pagina 33

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 210
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 32
Installation and Operation Manual Chapter 1 Introduction
LA-210 Ver. 1.5 Functional Description 1-7
1.3 Functional Description
This section describes the major functional features of LA-210.
Interfaces
This section provides an overview over interfaces available on LA-210.
Ethernet Interface
The Ethernet physical interface is 10/100BaseT. The interface supports
autonegotiation.
WAN Interface
The SHDSL interface supports ITU-T G.991.2 and ETSI 101524 standards for
SHDSL.
Control Interface
The control port connects directly to an ASCII terminal for locally managing the
unit.
Ethernet Access (Bridge Mode)
LA-210 has a multi-port bridging capability handling up to six bridge ports. The
Bridge supports two modes of operation:
VLAN-aware
VLAN-unaware.
The mechanism of each mode can be described as five different processes:
Ingress: Checks each frame entering the bridge to decide if and how this
frame should be passed on to the forwarding process
Learning: Learns new MAC table entries (MAC only or MAC VID pairs)
Aging: Checks the forwarding MAC table periodically
Forwarding: Decides to which bridge port/ports to forward the frame
Transmission (VLAN-aware mode only): Selects the format of the transmitted
frame at the output port: with VLAN ID (tagged) or without VLAN ID
(untagged).
Bridge features and these five processes are described below for each mode.
VLAN-Aware Mode
This mode enables the creation of sub-groups of bridge ports within the bridge.
Each sub-group is defined per VLAN and is associated with a unique VLAN ID
(VID). Frames containing a VID can be forwarded only between bridge ports that
Vista de pagina 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 209 210

Comentarios a estos manuales

Sin comentarios