RAD Data comm Optimux-108 Especificaciones descargar pdf (Pagina 91)

Installation and Operation Manual Chapter 5 Monitoring and Diagnostics

Optimux-108 Ver. 6.1 Monitoring Performance 5-3

Table

5-2. System Status Parameters

Parameter Description

Device Number

Indicates the Optimux-108 currently being monitored:

• Local

• Remote

Device type Displays the device type

Redundancy status Indicates if redundancy is available or not available

• Available – two uplinks are mounted

• Not Available – only one uplink is mounted or Redundancy

mode is ‘OFF’

Redundancy mode The redundancy state of the system:

• AUTO

• MANUAL

• OFF

The option is hidden when redundancy status is not available.

Force Link Indicates the main uplink

Active Link Identifies the currently active link

PS A Status The state of the Power Supply A:

• OK

• Fault

PS B Status The state of the Power Supply B:

• OK

• Fault

Alarm Indication Current system status:

• Normal - System is functioning normally; no alarms activated

• Major - One or more major alarms are currently activated

• Minor - One or more minor alarms are currently activated

Test Indication Indicates whether any tests are currently active in the device:

• ON - Tests are currently active in the device

• OFF - No tests are currently running

³ To set the device to monitor:

• Enter 1.

The Device Number toggles between Local and Remote, to indicate the

device currently being monitored.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 131 132

Sin comentarios

RAD Data comm Optimux-108 Especificaciones Pagina 91